The Administrator Utility
Filtering:
MThere are a maximum of 100 filters allowed for each category (User IPs, User MACs, and Administrator MACs).
MTo enable filtering for User Stations, Click to put a check mark in the IP and/or MAC Filter enable checkbox.
MTo add a filter, Click Add. A dialog box similar to the ones below appears (the top example is for IP address filters; the bottom is for MAC address filters):
MSpecify the filter address in the dialog box, then Click OK.
MEach filter can consist of a single IP or MAC address, or a range of IP addresses. For a single IP address filter, the address is the same for both the From and To fields.
MTo delete a filter, select it and Click Remove; To modify a filter, select it and Click Edit. The Edit dialog box is similar to the Add dialog box. When it comes up, simply delete the old address and replace it with the new one.
19
