ATEN Technology CN-6000 user manual The Administrator Utility, 2003-11-03

The Administrator Utility

When the Utility comes back up, it searches for all the the CN-6000 devices installed on the local LAN segment and displays the results in the large central panel (CN-6000 devices).

MIf the unit you wish to configure appears in the listbox, Double Click it.

MIf the unit you want doesn’t appear in the listbox, key in its IP address in the CN-6000 address field, and its Port number in the Port box, then Click Login.

Note: 1. The Port number that corresponds to a unit’s IP address is set by the Administrator on the Network configuration page (see p. 16 for details).

2.Clicking the Refresh button causes the utility to rescan the local LAN segment for CN-6000 devices.

3.If the utlity fails to connect to a unit that you specified, it assigns another free IP address (if one exists), to that device and attempts to connect again.

4.When the Administrator Utility searches for CN-6000 devices, if it finds them in different network segments (one at 10.0.0.xxx, and another at 216.0.0.xxx, for example), it will attempt to substitute a dynamic IP address (10.0.0.111, for example).

11

2003-11-03