ATEN Technology CN-6000 The Windows Client, Introduction, Chapter, Installation, Starting Up

The Windows Client

Chapter 4.

The Windows Client

Introduction

Installation

The Windows-based Client software is provided on the distribution CD included with this package. To install the Windows Client, insert the CD into your CD-ROM drive and double click the CN6KClient... package icon.

Follow the on-screen instructions. When the installation completes, a CN6000 Client icon appears on your desktop.

Starting Up

To bring up the Windows Client Main Screen, Double Click the CN6K Client icon, or key in the full path to the program on the command line.

If this is the first time that you are running the program, a dialog box appears requesting you to input your serial number:

If you don’t know what it is, contact the CN-6000 administrator. Key in the serial number - 5 characters per box - then Click OK.

Note: You must have DirectX 7.0 or higher installed on your computer. If not, the Client program will not load.

29

2003-11-03