Function Key Programming | Function Keys - Page 47 |
RBak - Cancel Ringback When Free
Cancels any set ringback when free function.
This function does not require any data entered when programmed. This function cannot be programmed through the phone by the user.
Pressing 
RBak- switches off any set ring back when free. If the ringback was set using a 
AutCB key, that key will still appear with a 
symbol that can be cancelled by pressing the 
AutCB key again.
[User Digital Telephony Advanced Miscellaneous Cancel Ringback When Free]
RBSeq - Set Ringback Sequence
Sets the ringing pattern (sequence) used for voicemail and ringback calls.
This function is currently not supported on the 2420 telephone.
Recor - Call Record
Records the current call at the specified target extension.
This function requires entry of a target extension number when programmed. This function cannot be programmed through the phone by the user.
When 
Recor is pressed, the target extensions current call is recorded into their voicemail mailbox.
Note: This function requires Voicemail Pro to be installed. If advice of call recording is enabled, the call parties will hear a warning before the recording takes place. In some locations it may be a legal requirement to advise callers that a call is being recorded.
[User Digital Telephony Advanced Call Call Record]
See also:
•Listn - Call Listen on page 45.
•Steal - Call Steal on page 54.
Relay - Relay Pulse
Pulse the specified external output relay (1 or 2) on for 5 seconds.
This function requires the relay switch (1 or 2) on the telephone system to be entered when programmed. This function cannot be programmed through the phone by the user.
Pressing 
Relay switches the specified relay on for 5 seconds and then off.
[User Digital Telephony Advanced Relay Relay Pulse]
Rely+ - Relay On
Switch the specified external output relay (1 or 2) on.
This function requires the relay switch (1 or 2) on the telephone system to be entered when programmed. This function cannot be programmed through the phone by the user.
Pressing 
Relay switches the specified relay on.
[User Digital Telephony Advanced Relay Relay On]
IP Office 2420 + EU24 User’s Guide | Function Keys - Page 47 |
40DHB0002UKEG – Issue 4 (9th February 2004) | Function Key Programming |
