Configuring Telnet for Windows 2000/XP
Configuring Telnet for Windows 2000/XP
You can set the Microsoft Telnet application to send a carriage return (CR) and line feed (LF) whenever you press Enter. The installation program sees this as 2 key presses. If you are running Windows 2000/XP, correct this before you copy the Remaster Program to the SDD.
To configure telnet for Windows 2000/XP:
1.Click Start > Run to open the Run dialog box.
2.Type telnet and press Enter to open a Microsoft Telnet session.
3.Type display and press Enter to see the current settings.
●Close the dialog box if the Line feed mode - Causes return key to send CR appears.
●Continue if New line mode - Causes return key to send CR & LF appears.
4.Type unset crlf and press Enter.
5.Type display and press Enter to verify that Line feed mode - Causes return key to send CR appears.
6.Close the dialog box.
Installing and Configuring the Avaya S8400 Media Server | February 2006 31 |
