Chapter 1: Introduction

To configure the media server, use the Avaya Installation Wizard. To configure gateways and other hardware components, use two administration interfaces:

Maintenance Web Interface

Command line interface, directly through, secure shell (SSH), telnet, or a terminal emulation program such as Avaya Native Configuration Manager.

You are not required to install the media server before the port networks (media gateways); however, the license file allows only 30 minutes to "see" the administered and connected IP Interface (SIPI) circuit packs.

The following information is included in this installation procedure:

Pre-installation: before going on site on page 9

Configuration of the SNMP modules in the UPS on page 25

Media server configuration on page 35

IP interface translations on page 43

IP interface configuration on page 49

Post-installation administration on page 57

Installation verification on page 63

Media server access on page 73

Installation troubleshooting on page 83

Audience

This documentation is for the following people tasked with installing and configuring the media server components:

Trained field installation and maintenance personnel

Technical support personnel

Authorized Business Partners

Installing and Configuring the Avaya S8400 Media Server

February 2006 7

Page 7
Image 7
Avaya S8400 manual Introduction, Audience