Chapter 5: IP interface translations

Starting SAT terminal emulation

For Communication Manager SAT terminal emulation, use a program such as Avaya Native Configuration Manager or HyperTerminal. You also can use Avaya Site Administration to issue SAT commands.

1.On the services laptop, open a VT-100 terminal emulation session.

2.If using a serial modem connection, administer the terminal emulation port settings:

9600 baud

No parity

8 data bits

1 stop bit

No flow control

5023 for the port

3.Log into the media server as craft.

Inputting initial system translations

If system translations were prepared offsite, input the translations and reset the media server. If the translations are not available, enter minimal translations to verify connectivity to the port networks.

1.Type save translation and press Enter to save the translations to the hard drive.

2.Type reset system 4 and press Enter to have the software read the copied translations.

Adding media gateways

Note:

If system translations have been loaded on the media server, media gateways do not need to be added in order to administer the SIPI.

44 Installing and Configuring the Avaya S8400 Media Server

February 2006

Page 44
Image 44
Avaya S8400 manual Starting SAT terminal emulation, Inputting initial system translations, Adding media gateways