Avocent CCM User Commands

86CCM Installer/User Guide

Table 5.40: SPC Socket Command Parameters

Parameter	Description
<port>ALL	Port number, port name or All, which indicates that the settings/operations that follow
	should be applied to all ports configured as TD=SPC. If the name contains spaces, it
	must be enclosed in double quotes.
SOCKET <socket>	Socket number.
WAKE=ONOFF	State that the socket will enter when the SPC device is powered up.
	Default = On
	Minimum amount of time that a socket will stay on before it may be turned off. The value
	may be specified with S for seconds, M for minutes or H for hour. Valid values are:
ONMIN=<time>	0S, 15S, 30S, 45S, 60S, 75S, 90S, 105S.
	1M, 2M, 3M, 4M, 5M, 10M, 15M, 30M, 60M.
	1 H.
	Default = 0S
	Minimum amount of time that a socket will stay off before it may be turned on. The value
	may be specified with S for seconds, M for minutes or H for hour. Valid values are:
OFFMIN=<time>	0S, 15S, 30S, 45S, 60S, 75S, 90S, 105S.
	1M, 2M, 3M, 4M, 5M, 10M, 15M, 30M, 60M.
	1 H.
	Default = 0S
POWER=ONOFF	ON causes the specified socket(s) to turn on (after the time specified in Offmin).
	OFF causes the specified socket(s) to turn off (after the time specified in Onmin).
REBOOT
	REBOOT causes the specified socket(s) to turn off, then on.

Example

The following command turns on all sockets on the SPC power control device attached to port 6 of the CCM appliance. The sockets will turn on based on their Offmin values.

spc 6 socket all on

User Commands

The User command has several forms, as listed in Table 5.41.

Table 5.41: User Command Summary

Command	Description
User Add	Adds a new user to the user database.
User Delete	Deletes a user from the user database.
User Logout	Terminates a user’s active session.
User Set	Changes a user’s configuration information.