100CCM Installer/User Guide
Appendix C: Supported Traps
The CCM appliance supports the following MIB2 traps:
•authenticationFailure
•linkUp
•linkDown
•coldStart
Table C.1 lists the supported enterprise traps. The Avocent web site (www.avocent.com) contains the complete trap MIB.
Table C.1: CCM Appliance Enterprise Traps
Trap | Description and Variable(s) |
AggregatedServer StatusChanged
The status of one or more servers (connections paths) has changed. The appliance always sends this trap upon bootup. Thereafter, it sends the trap when there is a change in connection path status, and will include only those paths whose status has changed.
Variable(s): connection path(s)
ConfigurationFile | The CCM appliance has loaded a configuration file. This trap applies to | |
AVWorks software. | ||
Loaded | ||
Variables: initiating username and name of loaded file | ||
| ||
|
| |
| The CCM appliance has received a command to set itself to factory default values. | |
FactoryDefaultsSet | (The appliance sends this trap after receiving the command, but before actually | |
| reverting to factory default values.) | |
|
| |
| An image upgrade has ended. | |
ImageUpgradeResults | Variables: result (successful or error code), initiating username, image type (boot or | |
application), upgrade version number and running version number (if the upgrade | ||
| ||
| was successful, the two version numbers will match) | |
|
| |
| The CCM appliance has started an image upgrade. | |
ImageUpgradeStarted | Variables: initiating username, image type (boot or application), new version | |
| number, current version number | |
|
| |
NFSDisableRqstd | A request has been made to disable NFS. | |
Variable: requesting username | ||
| ||
|
| |
NFSEnableRqstd | A request has been made to enable NFS. | |
Variable: requesting username | ||
| ||
|
| |
NFSMountedOK | NFS is enabled and the mount operation has completed successfully. | |
|
| |
| NFS is enabled but repeated mount attempts have failed. No additional mount | |
NFSMountFailedGave | retries will be performed. | |
Up | Variables: primary and secondary NFS error codes (see NFS Error Codes and Port | |
| ||
|
|