
70CCM Installer/User Guide
Table 5.18: Server RADIUS Command Parameters (Continued)
Parameter | Description | |
|
| |
SECRET=<secret> | ||
string in quotes if it contains spaces. | ||
| ||
| ||
|
| |
AUTHPORT=<udp> | UDP port for RADIUS authentication server, in the range | |
usually 1645, but may be 1812. | ||
| Default = 1645 | |
|
| |
Number of seconds to wait for a response from the RADIUS server, in the range | ||
Default = 5 | ||
| ||
|
| |
RETRIES = <retry> | Number of attempts to make to authenticate a user after a | |
Default = 3 | ||
| ||
|
| |
| Deletes a primary or secondary RADIUS server definition. If a primary server is | |
DELETE | deleted, and a secondary server was configured, that secondary server becomes the | |
| new primary server. | |
|
|
Examples
The following command specifies primary RADIUS server information; default values will be used for the UDP port,
>ser radius primary ip=192.168.0.200 secret=ThePrimaryRadSecret user- rights=86
The following command deletes the primary RADIUS server definition.
> ser radius primary del
Server Reboot commandThe Server Reboot command reboots the CCM appliance. During a reboot, any active Telnet sessions, including your own, are terminated, and all users are informed accordingly. Any configuration changes that require a reboot will become effective when the reboot completes.
When you enter this command, you are prompted to confirm or cancel the reboot.
You may also reboot the appliance by pressing the RESET button on the front panel. See Rebooting on page 10 for more information.
Access right: SCON
Access level: APPLIANCEADMIN
Syntax
SERVER REBOOT
Server Security commandThe Server Security command specifies the authentication method, enables/disables access methods and enables/disables security