66CCM Installer/User Guide
At least one parameter must be specified.
Access right: SCON
Access level: APPLIANCEADMIN
Syntax
SERVER CLI [TYPE=<type>] [CHAR=^<char>] [CONNECT=ONOFF] [HISTORY=HOLDAUTO,CLEARKEEP] [MODEMINIT=“<string>”]
Table 5.14: Server CLI Command Parameters
Parameter | Description | ||
|
| ||
| Terminal type to be used on the console port. The entire name of the type must | ||
TYPE=<type> | be specified; abbreviations are not permitted. Valid types are: ASCII, VT52, | ||
VT100, VT102, VT220 and VT320. | |||
| |||
| Default: ASCII | ||
|
| ||
| CLI access character in the range A through _ (underscore). (The allowable | ||
| ASCII range is | ||
CHAR=^<char> | pressed simultaneously with the Ctrl key during a session with an attached | ||
serial device, will suspend the session with the device and place you in CLI | |||
| command mode. This value will be used if a port’s Port Set command contains a | ||
| Char=None parameter. | ||
| Default = ^d | ||
|
| ||
| Enables or disables the ability to use the Connect command from the console | ||
| port. When enabled, a console port user may use the Connect command to | ||
CONNECT=ONOFF | establish a connection to the serial device attached to another CCM appliance | ||
serial port. When disabled, you cannot use the Connect command from the | |||
| |||
| console port. | ||
| Default = ON | ||
|
| ||
| Port history file processing options during connection (Hold or Auto) and when a | ||
| session ends (Clear or Keep): | ||
| Hold | Upon connection you are informed of how much data is in the history | |
|
| buffer, but the data is not displayed. | |
HISTORY=HOLDAUTO | Auto | Upon connection you are informed of how much data is in the history | |
,CLEARKEEP |
| buffer, and it is then displayed. | |
| Clear | The history buffer’s content is cleared when a session ends. | |
| Keep | The history buffer’s content is retained when a session ends. | |
| You cannot specify both Clear and Keep or both Hold and Auto. | ||
| Default = HOLD,CLEAR | ||
|
| ||
MODEMINIT=“<string>” | Modem initialization string, enclosed in quotation marks. Must contain at least | ||
ATV1 and S0=1. | |||
| Default = “” (no modem is attached to the console port) | ||
|
|
| |