72CCM Installer/User Guide
Table 5.20: Server Set Command Parameters
ParameterDescription
MASK=<subnet> | Subnet mask for the subnet on which the CCM appliance resides. |
GATEWAY=<gtwy> IP address of default gateway for routing IP packets.
Server Share commandThe Server Share command configures the share mode. For more information, see Session sharing on page 23.
Access right: SCON
Access level: APPLIANCEADMIN
Syntax
SERVER SHARE [DISABLEAUTOQUERY]
Table 5.21: Server Share Command Parameter
Parameter | Description | |
|
| |
DISABLE | Disables session sharing. Only one connection per port will be allowed. | |
|
| |
AUTO | Enables automatic session sharing (subject to preemption based on access level). | |
|
| |
QUERY | Enables session sharing when permission is obtained from the session originator | |
(subject to preemption based on access level). This is the default value. | ||
| ||
|
|
The Server SNMP command enables or disables SNMP UDP port 161 SNMP processing. When you disable SNMP processing, you may still enable and disable traps with the Server SNMP Trap command.
For more information, see Managing the CCM Appliance Using SNMP on page 39.
Access right: SCON
Access level: APPLIANCEADMIN
Syntax
SERVER SNMP ENABLEDISABLE
Table 5.22: Server SNMP Command Parameter
Parameter | Description | |
|
| |
ENABLEDISABLE | Enables or disables SNMP processing. | |
Default = Enabled | ||
| ||
|
|