Appendices 105

Appendix D: NFS Error Codes and Port Status

Table D.1 describes the error codes that may be reported by the CCM appliance for NFS history file operations. Your display may also have additional descriptive information.

Table D.1: NFS Error Codes

Error Description

Code

1An unidentified error was encountered. Check the console output for possible additional information.

2Internal CCM mount or unmount error.

3The file type is incompatible with the port filename.

4A port history filename error occurred.

5A port history file write error occurred.

6A port history file overrun error occurred.

7From the remote procedure call: arguments cannot be encoded.

8From the remote procedure call: the result cannot be decoded.

9From the remote procedure call: unable to send.

10From the remote procedure call: unable to receive.

11From the remote procedure call: a time-out occurred.

12From the remote procedure call: RPS versions were incompatible.

13From the remote procedure call: an authentication error occurred.

14From the remote procedure call: a program was unavailable.

15From the remote procedure call: a program/version mismatch occurred.

16From the remote procedure call: a procedure was unavailable.

17From the remote procedure call: the server cannot decode the arguments.

18From the remote procedure call: a remote system error occurred.

19From the remote procedure call: an unknown host was encountered.

20From the remote procedure call: a port mapper failure occurred.

21From the remote procedure call: the program was not registered.

22From the remote procedure call: the RPC failed due to an unspecified error.

23From the remote procedure call: an unknown protocol was encountered.