|
| Chapter 5: CCM Appliance Commands | 83 | |
|
|
|
| |
| Table 5.35: Show Server SNMP Command Display Fields (Continued) |
|
| |
|
|
|
|
|
| Field | Contents |
|
|
|
|
|
|
|
| Write Community | Write community name (from Server SNMP Community command). |
|
|
|
|
|
|
|
| Trap Community | Trap community name (from Server SNMP Community command). |
|
|
|
|
|
| |
|
| SNMP management entity IP addresses (from Server SNMP Manager command). If no | ||
| SNMP Managers | SNMP managers have been added or if they are all deleted, this field will |
|
|
|
| indicate (none). |
|
|
|
|
|
|
|
| Trap Dests | Destinations for enabled SNMP traps (from Server SNMP Trap Destination command). |
|
|
|
|
|
|
|
| Enabled Traps | Names of SNMP traps that have been enabled (from Server SNMP Trap command). |
|
|
|
|
|
|
|
The Show User command displays information about one or all users.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax
SHOW USER [<username>ALL]
Table 5.36: Show User Command Parameter
Parameter | Description | |
|
| |
<username> | Username. | |
Default: user currently logged in | ||
| ||
|
| |
ALL | Requests a display of all defined users. | |
|
|
The Show User command display for one user includes the information in Table 5.37.
Table 5.37: Show User Command Display Fields
Field
User
Level
Access
Groups
Contents
Username.
User’s access level. If a level was not configured, access rights determine the level: Users with SCON access => APPLIANCEADMIN.
Users with USER or PCON but not SCON => ADMIN. Otherwise, USER level is assigned.
User’s access rights.
User’s groups or blank if no groups.