54CCM Installer/User Guide

Disconnect Command

The Disconnect command terminates a session with a serial device that was previously initiated with a Connect command.

Access right: port-specific

Access level: ADMIN, APPLIANCEADMIN or others with access to port

Syntax

DISCONNECT

Help Command

The Help command displays information about CCM appliance commands. The display may span more than one screen; see Command displays on page 46 for more information.

Access right: none needed

Access level: none needed

Syntax

HELP [<command_name>]

Table 5.2: Help Command Parameter

Parameter

Description

 

 

<command_name>

Command name.

Default: Displays list of all commands

 

 

 

Examples

The following command displays information about the Show Server CLI command.

help sho ser cli

The following command displays a list of all commands.

help

The following command displays a list of all commands that begin with Server.

help server

NFS Command

The NFS command enables or disables use of the NFS feature on the CCM appliance, and specifies the location of the NFS server, its mount point, the type of files that will be created and the protocol to be used. For more information, see NFS history files on page 35.

Access right: SCON

Access level: APPLIANCEADMIN