
102CCM Installer/User Guide
Table C.1: CCM Appliance Enterprise Traps (Continued)
Trap | Description and Variable(s) | |
|
| |
| NFS is enabled on the port, but repeated attempts to open the history file on the | |
NFSPortOpenFailGave | NFS server have failed. No additional file open retries will be performed. | |
Variables: CCM appliance port number, port error status (see NFS Port Status | ||
Up | Values on page 111) plus primary and secondary NFS error codes (see NFS Error | |
| ||
| ||
|
| |
| NFS is enabled on the port, but the first attempt to open the history file on the NFS | |
NFSPortOpenFail | server has failed. Additional file open retries are being performed. | |
Variables: CCM appliance port number, port error status (see NFS Port Status | ||
Retrying | ||
Values on page 111) plus primary and secondary NFS error codes (see NFS Error | ||
| ||
| ||
|
| |
| NFS is enabled on the port and has successfully opened the history file on the NFS | |
| server; however, an overrun error occurred when writing to that file. | |
NFSPortOverrunError | Variables: CCM appliance port number, port error status (see NFS Port Status | |
| Values on page 111) plus primary and secondary NFS error codes (see NFS Error | |
| ||
|
| |
| NFS is enabled on the port and has successfully opened the history file on the NFS | |
| server; however, an error occurred when writing to that file. | |
NFSPortWriteError | Variables: CCM appliance port number, port error status (see NFS Port Status | |
| Values on page 111) plus primary and secondary NFS error codes (see NFS Error | |
| ||
|
| |
NFSUnmountedOK | NFS is disabled and the unmount operation has completed successfully. | |
|
| |
PortAlert | The CCM appliance detected a port alert string on a serial port. | |
Variables: server name, port number and port alert string | ||
| ||
|
| |
| The CCM appliance detected that a port’s power on/off control signal is in the state | |
PortPowerOffDetect | indicating power is off. This trap is sent upon initialization if the condition is detected. | |
Subsequent traps are sent only if this signal changes state. | ||
| ||
| Variables: server name and port number | |
|
| |
| The CCM appliance detected that a port’s power on/off control signal is in the state | |
PortPowerOnDetect | indicating power is on. This trap is sent upon initialization if the condition is detected. | |
Subsequent traps are sent only if this signal changes state. | ||
| ||
| Variables: server name and port number | |
|
| |
RebootStarted | The CCM appliance is rebooting. | |
Variable: initiating username | ||
| ||
|
| |
SerialSessionStarted | A serial session has started. | |
Variables: username, server name and port number | ||
| ||
|
| |
SerialSessionStopped | A serial session has stopped. | |
Variables: username, server name and port number | ||
| ||
|
| |
SerialSession | Another user has terminated a serial session. | |
Terminated | Variables: initiating username, terminated username, server name and port number | |
|
|