
Chapter 5: CCM Appliance Commands | 67 |
|
|
Table 5.14: Server CLI Command Parameters (Continued)
ParameterDescription
Number of
session to port 23 or an SSH session to port 22. Default = 15 minutes
Server FLASH commandThe Server FLASH command updates the CCM appliance program images in FLASH memory. You may wish to use this command to update the program with new features or to install a later release of the program.
There are two program images that you may update in the CCM appliance FLASH. The boot image file (ccm50bt.img) contains the CCM appliance startup and
You will need a TFTP server. Download the latest FLASH image from the Avocent web site (www.avocent.com), and save the image file to the appropriate directory on the TFTP server.
NOTE: Powering down a system in the middle of a boot FLASH update may render the unit inoperable. To update the bootstrap, it is recommended that the unit be placed on a UPS under controlled conditions to avoid interruption of the boot FLASH update process.
Access right: SCON
Access level: APPLIANCEADMIN
Syntax
SERVER FLASH BOOTAPP HOSTIP=<tftp_add> IMAGE=<host_file>
Table 5.15: Server FLASH Command Parameters
Parameter | Description | |
|
| |
BOOTAPP | Indicates either the boot image should be updated or the application image should | |
be updated. | ||
| ||
|
| |
HOSTIP=<tftp_add> | IP address of TFTP server host. | |
|
| |
IMAGE=<host_file> | Name of file on TFTP server host containing the image file. |
Example
The following command updates the boot image program using the image filename c:\winnt\system32\drivers\ccm50bt.img, which is located on the TFTP server host located at 192.168.1.16.
>ser fla app hostip=192.168.1.16 c:\winnt\system32\drivers\ima=ccm50bt.img