Chapter 5: CCM Appliance Commands

79

 

 

Table 5.30: Show Port Command Display Fields for TD=Console (Continued)

Field

Content

 

 

Access *

User’s access rights (from User Add and User Set Access commands).

 

 

 

Indicates if a user may connect to the port BY GROUP or BY PORT.

 

If there is any group defined for any ports (which can be determined with a Show

Port Access *

Port Groups command), each user may connect BY GROUP, unless a user’s access

rights include PALL, in which case, a user may connect BY PORT.

 

 

If a user is assigned an empty group (with no ports in it) or no groups at all, that user

 

may lose access to any port once there is a group defined for any port.

 

 

Locked *

Indicates if the port is LOCKED or UNLOCKED. If security lock-out is disabled, N/A

is displayed. See Using security lock-outon page 32 for more information.

 

 

 

Last Login *

System up time value when the user logged in.

 

 

Duration *

Duration of user’s session.

* Displayed only when the command specifies a single port that has a current connection.

Table 5.31 lists the display fields for a Show Port command (that specifies a single port or All) for ports that were configured as TD=SPC.

Table 5.31: Show Port Command Display Fields for TD=SPC

Parameter

Description

 

 

Status

ONLINE indicates the SPC device is powered up, OFFLINE indicates the SPC device

is powered down.

 

 

 

Version

SPC device firmware version.

 

 

Sockets

Number of sockets on the SPC device.

 

 

Minload

Minimum load amp value (from SPC command).

 

 

Maxload

Maximum load amp value (from SPC command).

 

 

Wake

Wakeup state for socket (from SPC command).

 

 

ON Min

Minimum On time (from SPC command).

 

 

OFF Min

Minimum Off time (from SPC command).

 

 

The Show Port Names command displays a list of port numbers and their names. If a port has not been assigned a name with the Port Set command, the default name is displayed.

The Show Port Groups command displays a list of port numbers and group assignments. The Show Port Alert command displays a port’s alert strings.