64CCM Installer/User Guide
Syntax
PORT [<port>ALL] SET INOUT [CR=<cr>] [LF=<lf>CRLF=CR]
Table 5.12: Port Set In/Out Command Parameters
Parameter | Description |
| |
|
| ||
<port> | Port number or name. | ||
Default = port to which you are attached | |||
| |||
|
| ||
ALL | Indicates that the port settings that follow should be applied to all ports except the | ||
console port. |
| ||
|
| ||
|
| ||
INOUT | Either IN to specify translation for incoming data or OUT to specify translation for | ||
outgoing data. |
| ||
|
| ||
|
| ||
| Translation to be made for carriage returns. Valid values are: | ||
| CR=CR | Carriage return is treated as a carriage return. | |
CR=<cr> | CR=LF | Carriage return is treated as a linefeed. | |
CR=STRIP | Carriage return is stripped. | ||
| |||
| CR=CRLF | Carriage return is treated as a carriage return and linefeed. | |
| Default = CR=CR | ||
|
| ||
| Translation to be made for linefeeds. Valid values are: | ||
| LF=LF | Linefeed is treated as a linefeed. | |
LF=<lf>CRLF=CR | LF=CR | Linefeed is treated as a carriage return. | |
LF=STRIP | Linefeed is stripped. | ||
| CRLF=CR | Linefeed is stripped only if it is preceded by a carriage return. | |
|
| This LF setting cannot be specified with any other LF setting. | |
Default = LF=LF
Quit Command
The Quit command terminates the current CCM appliance session and terminates your Telnet connection to the unit.
Access right: none needed
Access level: all
Syntax
QUIT
Resume Command
The Resume command exits the CLI and resumes your connection to the attached serial device. The history buffer contains any data received while you were in CLI mode.
Access right: none needed
Access level: all
Syntax
RESUME