Chapter 5: CCM Appliance Commands

77

 

 

If NFS has never been enabled on the appliance, the default values will be displayed. If NFS was previously enabled and successfully configured, then later disabled, the display will retain the configured address, mount point and file type values.

Access right: SMON

Access level: ADMIN or APPLIANCEADMIN

Syntax

SHOW NFS

Show NTP command

The Show NTP command displays NTP configuration information.

If NTP has never been enabled on the appliance, the default values will be displayed. If NTP was previously enabled and successfully configured, then later disabled, the display will retain the configured address and update values, and the status will remain Success.

If a second IP address was not configured, None will be indicated for that value. If a request for the time from the first server is successful, the second server’s status will indicate Not attempted.

Access right: SMON

Access level: ADMIN or APPLIANCEADMIN

Syntax

SHOW NTP

Show Port command

The Show Port command displays configuration and status information about one or all ports.

Access right: SMON

Access level: ADMIN or APPLIANCEADMIN

Syntax

SHOW PORT [<port>] [ALLNAMESGROUPSALERT]

Table 5.29: Show Port Command Parameter

Parameter

Description

 

 

<port>

A port number, port name or CON. If the port name contains spaces, it must be

enclosed in double quotes.

 

Default = your port

 

 

ALL

Displays information about all ports.

 

 

NAMES

Displays a list of port numbers and associated names.

 

 

GROUPS

Displays a list of port numbers and the group name assigned to each port (if any).

 

 

ALERT

Displays a port’s alert strings.