B&B Electronics EIR608-xSFP manual AutoTrueFalse

tp False

Displays a summary of switch>show spanning-tree

switch(config-if)#stp-admin-non-s

	command to set the
	path cost for Spanning
	Tree
	Protocol (STP)
	calculations. In the
	event of a loop,
	spanning tree
	considers the path
	cost when selecting
	an interface to place
	into the forwarding
	state.
		switch(config)#interface
stp-path-priority	I Use the spanning-tree
[Port Priority]	port-priority interface	fastEthernet 2
	configuration	switch(config-if)#stp-path-priority
	command to configure	128
	a port priority that
	is used when two
	switches tie for
	position as the root
	switch.
		switch(config)#interface
stp-admin-p2p	I Admin P2P of STP
[AutoTrueFalse]	priority on this	fastEthernet 2
	interface.	switch(config-if)#stp-admin-p2p
		Auto
		switch(config)#interface
stp-admin-edge	I Admin Edge of STP
[TrueFalse]	priority on this	fastEthernet 2
	interface.	switch(config-if)#stp-admin-edge
		True
		switch(config)#interface
stp-admin-non-stp	I Admin NonSTP of STP
[TrueFalse]	priority on this	fastEthernet 2
	interface.

show spanning-tree

E

32	Manual Documentation Number: EIR608-xSFP_0708m
	B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
	B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com