Rate Limiting
Set up each port’s bandwidth rate and frame limitation type.
Ingress Limit Frame type: Select the frame type to filter. There are
four options: All, Broadcast/Multicast/Flooded Unicast, Broadcast/Multicast and Broadcast only.
Egress Limit: The egress rate limit is ALL.
Rate Limiting interface
All the ports support port ingress and egress rate control. For example, assume port 1 is 10Mbps, users can set its effective egress rate to 1Mbps, and ingress rate is 500Kbps. The switch performs the ingress rate limiting using a packet counter to meet the specified rate
¾Ingress: Enter the port effective ingress rate(The default value is ‘0’)
¾Egress: Enter the port effective egress rate(The default value is ‘0’)
Click Apply 
66 | Manual Documentation Number: |
| |
| B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph |
| B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 |
