Trap Configuration
A trap manager is a management station that receives traps (the system alerts generated by the switch). If the trap manager is not defined, traps will not be issued. Create a trap manager by entering the IP address of the station and a community string.
1.IP Address: Enter the IP address of the trap manager.
2.Community: Enter the community string.
3.Trap Version: Select the SNMP trap version type (v1 or v2c).
4.Click Add 
.
5.To remove the community string, select the community string and click Remove 
. You cannot edit the name of the default community string.
Trap Managers interface
SNMPV3 Configuration
Context Table
Configure SNMP v3 context table. Assign the context name of context table.
Click Add 
to add context name. Click context name.
Remove 
to remove an unwanted
Manual Documentation Number: | 77 |
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353
