B&B Electronics EIR608-xSFP manual Trunk Commands Set

		form of this command
		to disable the port.
			switch(config)#interface
show interface	I	show interface
configuration		configuration status	fastEthernet 2
			switch(config-if)#show interface
			configuration
			switch(config)#interface
show interface status	I	show interface actual
		status	fastEthernet 2
			(config-if)#show interface status
			switch(config)#interface
show interface	I	show interface statistic
accounting		counter	fastEthernet 2
			(config-if)#show interface
			accounting
			switch(config)#interface
no accounting	I	Clear interface
		accounting information	fastEthernet 2
			switch(config-if)#no accounting

Trunk Commands Set

Commands	Level	Description	Example
aggregator priority	G	Set port group system	switch(config)#aggregator priority
[1~65535]		priority	22
			switch(config)#aggregator
aggregator activityport	G	Set activity port
[Group ID]			activityport 2
[Port Numbers]
			switch(config)#aggregator group
aggregator group	G	Assign a trunk group
[GroupID] [Port-list]		with LACP active.	1 1-4 lacp workp 2
lacp		[GroupID] :1~4	or
workp		[Port-list]:Member port	switch(config)#aggregator group
[Workport]		list, This parameter	2 1,4,3 lacp workp 3
		could be a port
		range(ex.1-4) or a port
		list separate by a
		comma(ex.2, 3, 6)

Manual Documentation Number: EIR608-xSFP_0708m		27
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax	815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444	– Fax +353 91-792445 – www.bb-europe.com