B&B Electronics EIR608-xSFP manual Sntp Commands Set, Start time End time

			both
			switch(config)#interface
event smtp	I	Set port event for
[Link-UPLink-DownBot		SMTP	fastethernet 3
h]			switch(config-if)#event smtp both
			switch#show event
show event	P	Show event selection
			switch(config)#no event
no event	G	Disable cold start
device-cold-start		event type	device-cold-start
			switch(config)#no event
no event	G	Disable Authentication
authentication-failure		failure event typ	authentication-failure
			switch(config)#no event
no event	G	Disable X-ring
X-ring-topology-change		topology changed	X-ring-topology-change
		event type
			switch(config)#interface
no event systemlog	I	Disable port event for
		system log	fastethernet 3
			switch(config-if)#no event
			systemlog
			switch(config)#interface
no event smpt	I	Disable port event for
		SMTP	fastethernet 3
			switch(config-if)#no event smtp
			switch#show systemlog
show systemlog	P	Show system log client
		& server information

SNTP Commands Set

Commands	Level	Description	Example
sntp enable	G	Enable SNTP function	switch(config)#sntp enable
			switch(config)#sntp daylight
sntp daylight	G	Enable daylight saving
		time, if SNTP function
		is inactive, this
		command can’t be
		applied.
			switch(config)# sntp
sntp daylight-period	G	Set period of daylight
[Start time] [End time]		saving time, if SNTP	daylight-period 20060101-01:01
		function is inactive,	20060202-01-01
		this command can’t be

42	Manual Documentation Number: EIR608-xSFP_0708m
	B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
	B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com