B&B Electronics EIR608-xSFP manual Value, Enable Disable

		unicast frame’	cast
			switch(config)#interface
bandwidth type	I	Set interface ingress
broadcast-multicast		limit frame type to	fastEthernet 2
		‘accept broadcast and	switch(config-if)#bandwidth type
		multicast frame’	broadcast-multicast
			switch(config)#interface
bandwidth type	I	Set interface ingress
broadcast-only		limit frame type to ‘only	fastEthernet 2
		accept broadcast	switch(config-if)#bandwidth type
		frame’	broadcast-only
			switch(config)#interface
bandwidth in	I	Set interface input
[Value]		bandwidth. Rate	fastEthernet 2
		Range is from 100	switch(config-if)#bandwidth in 100
		kbps to 102400 kbps
		or to 256000 kbps for
		giga ports,
		and zero means no
		limit.
			switch(config)#interface
bandwidth out		Set interface output
[Value]		bandwidth. Rate	fastEthernet 2
		Range is from 100	switch(config-if)#bandwidth out
		kbps to 102400 kbps	100
		or to 256000 kbps for
		giga ports,
		and zero means no
		limit.
			switch(config)#interface
show bandwidth	I	Show interfaces
		bandwidth control	fastEthernet 2
			switch(config-if)#show bandwidth
			switch(config)#interface
state	I	Use the state interface
[Enable Disable]		configuration	fastEthernet 2
		command to specify	(config-if)#state Disable
		the state mode of
		operation for Ethernet
		ports. Use the disable

26	Manual Documentation Number: EIR608-xSFP_0708m
	B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
	B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com