Baldor EXB013A01, Device Net Expansion Board manual Usint, Byte

Table 6-1Transaction Specification Table Continued

T#	Name	Type	Data Field	Class	Description
69	ClearAll	Set	USINT	All	Reserved for factory
					use.
70	LogClear	Set	USINT	All	Reserved for factory
					use.
71	AnalogInput1	Get	UINT	All	Reads the raw value
					of the A/D
					converters on the
					control. Update rate
72	AnalogInput2	Get	UINT	All	and resolution vary
					per control. Unused
					MSBs will be padded
					with zero.
73	SetAnalogOut1	Set	INT	All	Commands the
					DACs on the control,
					and/or option card.
					Analog output
					parameter must be
74	SetAnalogOut2	Set	INT	All
					set to Serial to be
					valid. (Note 8 bit
					DACs will only use
					the upper byte.)
75	SetDigitalOut	Set	BYTE	All	Commands the
					digital outputs on the
					control, and/or option
					card. Only lowest
					four bits are used.
					The LSB
					corresponds to opto
					out #4. The opto
					output parameter
					must be set to serial
					to be valid.
76	GetDebugVal	Get	C: INT	All	Reserved for factory
			MemLoc		use.
			R: INT Value

* Indicates initial powerup value.

Command Language 6-15