Baldor Device Net Expansion Board, EXB013A01 manual ParameterValue Set

Table 6-1Transaction Specification Table Continued

T#	Name	Type	Data Field	Class	Description
61	ParameterValue	Set/	C: INT	All	Change / request
		Get	Pnum,		value of specified
			Pvalue		user parameter.
			R: INT		Returned value will
			Pvalue		give actual, after any
			(excluding		bounds checking.
			Pvalue from		Refer to the control
			CMD		manual for
			indicates		description.
			request only).
62	BatchSend	Get	C: INT	All	Batch transfer that
			GroupNumbe		returns raw (data
			r		only) from control to
			R: INT		host. Up to 16
			PnumN,		parameters are sent
			PvalueN, ...		at a time. Last group
			N=16		will be truncated if
					necessary. Group
					numbers start at 0. If
					the GroupNumber
					exceeds the number
					of blocks an ‘end of
					block’ status is
					returned. The control
					must be disabled.
63	BatchRcv	Set	INT	All	Block transfer that
			PnumN,		accepts raw
			PvalueN, ...		parameter (data
			N=16		only) from host to
					control. Up to 16
					parameters may be
					sent at a time.
					Parameters may be
					sent in any order.
					The control must be
					disabled.
64	FactorySettings	Set	BOOL	All	1 = Reset all
					parameters to
					factory settings.
					0 = No action

* Indicates initial powerup value.

6-14 Command Language