Section 4

Hardware Setup

DIP Switch Settings

This procedure will configure the Device Net Expansion Board for communication with a computer or terminal. Reference Figure 4-1 and Table 4-1 for the following procedure.

1.Set DIP switches 1 and 2 for the desired baud rate.

2.Set switches 3 through 8 for the ID number desired.

3.Install the Device Net expansion board in the Series H control as instructed in Section 3 of this manual.

Note: The switch settings can be changed after the board is powered up. However, switch changes will not take effect until the board is reset (by pushing PB1 or by turning power off then on).

Cable Connection

1.Connect the Device Net wires to the 5 pin connector provided with the expansion board as shown in Figure 4-1.

Note: The Device Net bus must provide 24VDC power to the expansion board.

2.If a terminator is required, connect a 120 ohm terminating resistor across pins 2 and 4 of the modular connector (CAN– and CAN+).

Powerup

When the Device Net expansion board is powered up it will perform the following:

1.Perform a self test.

2.Check the switch settings for configuration information.

3.Verify communications with the Series H control board.

4.Check for power on the Device Net bus.

5.Perform a Duplicate MAC ID check to determine if any other devices on the network have the same MAC ID number.

6.Go online.

After powerup, both LED’s should be GREEN.

Refer to the LED Indicators description in this section of the manual.

Hardware Setup 4-1

Page 15 Page 17
Page 16
Image 16
Baldor EXB013A01, Device Net Expansion Board manual Hardware Setup, DIP Switch Settings, Cable Connection, Powerup
Page 15 Page 17

Device Net Expansion Board, EXB013A01 specifications

The Baldor EXB013A01 Device Net Expansion Board is a cutting-edge component designed to enhance the functionality of Baldor's motion control products. Offering a robust solution for integrating control systems within industrial automation, this expansion board allows for seamless communication between various devices over a DeviceNet network.

One of the main features of the EXB013A01 is its ability to deliver precise control capabilities. It enables users to connect additional I/O devices, sensors, and actuators, which is crucial for complex automation tasks. This flexibility ensures that users can customize their systems according to specific operational needs while maintaining a high degree of efficiency.

The integration of DeviceNet technology is a key characteristic of the EXB013A01. DeviceNet is a widely recognized network protocol based on the Controller Area Network (CAN) and is designed to facilitate communication between various devices in a manufacturing environment. With its ability to support multiple master and slave devices, the EXB013A01 ensures that information is exchanged swiftly and reliably, which is critical for real-time processing and decision-making in automated environments.

Another significant feature of this expansion board is its ease of installation and configuration. Equipped with a user-friendly interface, the EXB013A01 allows operators to quickly set up connections and configure network parameters. This streamlined process reduces downtime during installation and improves overall productivity on the manufacturing floor.

The EXB013A01 also boasts high reliability and durability. Built to withstand harsh industrial environments, it is designed with sturdy components that ensure long-term performance. This reliability is paramount as it minimizes the risks of Service interruptions, safeguarding critical manufacturing operations.

In summary, the Baldor EXB013A01 Device Net Expansion Board stands out as a vital addition to Baldor's motion control lineup. With its precise control capabilities, robust DeviceNet integration, user-friendly setup, and high durability, it serves as an essential tool for manufacturers aiming to enhance their automation systems and drive operational excellence. Integrating this expansion board into existing setups can greatly improve flexibility and efficiency, making it an invaluable asset for any modern industrial automation application.
Top Page Image Contents