Baldor MN1928 installation manual Introduction, Backplanes, Input / Output

5 Backplanes 5

5.1 Introduction

This section describes the optional backplane cards available for use with the NextMove ES. These cards all provide standard wiring connections to the NextMove ES, but there are a number of variants available:

HBaldor part number BPL010-501: Non-isolated backplane.

HBaldor part number BPL010-502: Isolated PNP backplane.

HBaldor part number BPL010-503: Isolated NPN backplane.

It is recommended to use one of these dedicated backplanes with your NextMove ES.

Each table shows the required mating connector and the associated pin on the NextMove ES 96-pin connector. Where multiple pins exist with the same function, for example AGND, one example pin number is shown, but any identically named pin represents the same electrical connection.

See section 4.2 for details of the 96-pin connector.

MN1928 Input / Output 5-1