Baldor MN1928 5.2 BPL010-501 non-isolatedbackplane, 5-2Input / Output, Location, Name, 96-pin

5.2 BPL010-501 non-isolated backplane

This backplane provides direct connection to the NextMove ES signals without isolation. The electrical specifications of all signals are therefore the same as described in section 4.

In the following sections, the signals AGND, DGND and Shield are listed with nominal corresponding pins on the 96-pin connector, although they are all electrically connected on the backplane. The OUT COM pin on connector X11 is not connected to ground.

Some signals are duplicated on multiple identically named pins on the 96-pin connector. In these cases, only the lowest numbered pin is listed.

CAUTION: Some components are static sensitive devices. Take appropriate ESD precautions when handling the backplane.

5.2.1 Analog inputs

	Location	X8
10		Mating connector: Weidmüller Omnimate BL 3.5/10
	Pin	Name	Description	96-pin
				connector
	10	Shield	Shield connection	a32
	9	DGND	Digital ground	a3
	8	!RSTIN	Reset input	c12
	7	ERROR	Error output	b11
1	6	AGND	Analog ground	a30
	5	AIN1-	Analog input AIN1-	a27
	4	AIN1+	Analog input AIN1+	c28
	3	AGND	Analog ground	a30
	2	AIN0-	Analog input AIN0-	a28
	1	AIN0+	Analog input AIN0+	b28

See section 4.3.1 for electrical specifications of the analog inputs.

5-2 Input / Output MN1928