Programming 6-25MN792
Digital OutputsDigital outputs can read all parameters (the same as the analog outputs). When used with a VALUE parameter,
MODULUS removes the sign from the value (so 100 becomes 100). The THRESHOLD (>) parameter
determines when the output is HIGH or LOW. The input signal must exceed the Threshold value for the output
to go HIGH. INVERTED, when TRUE, inverts the result of the output from the threshold test.
1 SYSTEM
2 CONFIGURE I/O
3 DIGITAL OUTPUTS
4 DIGOUT1 (B5)
4 DIGOUT2 (B6)
4 DIGOUT3 (B7))
Threshold (>)
Modulus
Source Tag
Inverted
Tag Parameter
[195] Threshold (>) 0.00%
[359] Inverted False
Setting
[43] Modulus True
Digital
Output 1
Digital Output 1 DIGOUT 1 (B5)
[97] Source Tag 77 ABS
B5
77
At Zero
Speed
Tag Parameter
[196] Threshold (>) 0.00%
[360] Inverted False
Setting
[44] Modulus True
Digital
Output 2
Digital Output 2 DIGOUT 2 (B6)
[98] Source Tag 122 ABS
B6
122
Healthy
Tag Parameter
[197] Threshold (>) 0.00%
[361] Inverted False
Setting
[45] Modulus True
Digital
Output 3
Digital Output 3 DIGOUT 3 (B7)
[99] Source Tag 125 ABS
B7
125
Ready
Parameter Descriptions
Threshold (>)
The threshold which the value must exceed to set the output to true. Range: 300.00 to 300.00 %
Modulus
Output set TRUE for absolute or modulus of the tag no. value. Range: 0 : False
1 : True
Source Tag (Input)
Defines the source variable to control the digital output. Range: 0 to 549
Inverted
Selects Inverted Output. Range: 0 : False
1 : True
DIGOUT 1, 2 , and 3 (Read in Diagnostics Parameters)
Refer to the diagnostics function block description. Range: 0 : Off
1 : On