PSU

The chunky remote 19" racked power supply is connected via a circular multiway (DC POWER IN) at the bottom left-rear of the console. This supplies several DC operating voltages incl. +/-18 V (audio circuits), +48 V (mic phantom power), +12 V (BNCs) and +5 V (LEDs).

Fig. 7.2: Power supply unit connector

Auxiliary sends

Unbalanced 1/4" jacks, wired tip = signal (+ve) and sleeve = ground/screen. They operate at +4 dBu.

Fig. 7.3: Auxiliary sends

Auxiliary returns

All six stereo pairs are on unbalanced 1/4" jacks and operate at 0 dBu. Situazed immediately below the aux sends.

Fig. 7.4: Auxiliary returns

24

Page 24
Image 24
Behringer MX9000 user manual Auxiliary sends, Auxiliary returns