Manuals / Behringer / Computer Equipment / Electronic Accessory

Behringer MX9000 Stereo outputs, Phones 1/2, Meter/analyzer out, Master balanced outputs

Models: MX9000

1 57

Page 26

Stereo outputs

Control room output (monitors) main mix, MIX-B and studio output. All are on a pair of unbalanced 1/4" jacks, nominal output level +4 dBu. The main mix is also available as a fully balanced pair.

Phones 1/2

These are on stereo jacks, wired tip = left signal, ring = right signal and sleeve = ground/screen (see section 6.4 “Headphones”).

Meter/analyzer out

Unbalanced jacks at +4 dBu for use with external measuring equipment, e.g. the built-in real-time analyzer of our BEHRINGER ULTRA-CURVE PRO DSP8024 (signal = master LED meters).

Master balanced outputs

Balanced XLR for connecting to the mastering recorder. Wired pin 1 ground/screen, pin 2 hot and pin 3 cold. Maximum level is +28 dBu.

Fig. 7.8: Main balanced outputs

Fig. 7.9: A and B-channel input section

Page 26

Image 26

Behringer MX9000 user manual Stereo outputs, Phones 1/2, Meter/analyzer out, Master balanced outputs

Contents

ENGLISH EURODESKMX9000User´s Manual SAFETY INSTRUCTIONS FOREWORD TABLE OF CONTENT 13.START-UP 1.1 Nomenclature 1. THE MANUAL2. EURODESK OVERVIEW 1.2 An un-holstic approach2.3 PSU Power Supply Unit 2.2 Metering3.1 Channel strip 3.2 Input switching3. INPUT/OUTPUT CHANNEL Fig. 3.1 Input3.3 Input gain setting Fig. 3.2 Channel input switching architectureFig. 3.3 Main equalizer 3.4 Main equalizer3.5 Aux sends 3.6 Routing and muting Fig. 3.4 Aux sends3.7 B-channel Fig. 3.5 Routing4. INSERTS Fig. 3.6 B-channelFig. 4.1 Post EQ channel insert 5. SUBGROUP AND DIRECT OUTPUTS5.1 Subgroups Fig. 5.1 Stereo subgroup channel schematic 6.1 Aux masters 6. MASTER PANEL5.2 Direct outputs Fig. 6.1 Aux sends 6.1.2 Aux returnsFig. 6.2 Stereo aux returns b Aux returns 3 to 6.2 MIX-B mastera Aux returns 1 and c SOLO6.3 Monitoring Fig. 6.4 Monitoring6.4 Headphones Fig. 6.5 PhonesFig. 6.6 Solo section 6.5 PFL/SOLO6.6 Talkback 6.5.1 PFLFig. 7.1 Expander port bus inputs 7. CONNECTIONS7.1 Rear panel Fig. 7.3 Auxiliary sends Fig. 7.2 Power supply unit connectorAuxiliary sends Auxiliary returnsFig. 7.5 Subgroup inserts Fig. 7.7 Additional connectorsSubgroup inserts 2-track in/outMeter/analyzer out Stereo outputsPhones 1/2 Master balanced outputsFig. 7.11 Subgroup outputs/tape sends and operating level switch 7.2 Plug soldering guideFig. 7.10 MIX-B operating level switch and phantom power switch A-channel line inputsPage Page 8.2 The patchfield 8. THE PATCHFIELD8.1 The normalized bay Fig. 8.1 Example of patchbay configurations 8.3 Looming problems Fig. 8.2 Wiring for bay 8 for advanced wiring scheme refer to section9. EQUALIZATION 10. GAIN OPTIMIZATION 11. IMPEDANCES AND TUNING 12. UNBALANCED LINESHere something exquisitely simple happens Fig. 12.1 A balanced microphone line13. START-UP 13.1 A-channel setting up procedure13.2 Desk/tape setting up procedures 13.2.3Recording levels 14. 8-TRACK MIDI SUITE/DANCE PRODUCTION STUDIO13.2.2 Multitrack initialization 13.2.4Auditioning a mixFig. 14.2 Simple auxless headphones mix 14.2 Auxless headphones mix14.1 Sends Fig. 14.1 Send routingFig. 14.4 Subgroup-driven auxless headphones mix 14.3 ReturnsFig. 14.3 Slightly more complicated auxless headphones mix 14.5 Mixdown 15. 16-TRACK RECORDING WITH 2 SAMPLERS14.4 Lining up record/sample inputs 15.1 Recording15.3 Mixdown 15.2 Headphones16. PROFESSIONAL 24-TRACK STUDIO 16.1 Recording16.2 Very tricky headphones Tab. 16.1 Channel assignment16.3 Wet monitoring 16.4 MixdownS48 is UP, i.e. MIX-B is NOT blended into the main mix 17. LIVE P.A. WITH 2-TRACK RECORDINGTab. 17.1 Channel assignments 2-track 18. LIVE CONCERT WITH 24-TRACK RECORDING + + + + Tab. 18.2 Front/rear/stage monitors routing19.1 Connections 19. EXPANDING THE EURODESK MX900020. TIMECODE 19.2 AlignmentHowever 21. BOUNCING22. SEQUENCING “LIVE” 1. TRACK STACK RULEFig. 23.1 Input/output configuration 23. INPUT/OUTPUT CONFIGURATION24. MODIFICATIONS 24.3 LED meters pre fader 24.1 Aux sends post EQ24.2 MIX-B source post fader Fig. 24.1 Modifications aux send post EQEqualisation 25. SPECIFICATIONSMain channel strip Channel direct outGeneral Power supplyDimensions/weight § 2 WARRANTY 26. WARRANTY§ 1 WARRANTY CARD/ONLINE REGISTRATION § 3 RETURN AUTHORIZATION NUMBERPage