Belkin F5D9230UK4 user manual Alternate Setup Method, Step Connecting your Gateway Router

Alternate Setup Method

Step 1 Connecting your Gateway Router

1.1Turn off the power to your modem by unplugging the power supply from the modem.

1.2Locate the network cable that is connected between your modem and your computer and unplug it from your computer, leaving the other end connected to your modem.

1.3Plug the loose end of the cable you just unplugged into the port on the back of the Router labeled “Internet/WAN”.

1.4Connect a new network cable (not included) from the back of the computer to one of the ports labeled “1–4”. Note: It does not matter which numbered port you choose.

1.5Turn your cable or DSL modem on by reconnecting the power supply to the modem.

1.6Before plugging the power cord into the Router, plug the cord into the wall, then plug the cord into the Router’s power jack.

Mac or PC computer that was originally connected to the cable or DSL modem

To Power Adapter

Existing networking cable

Network cable (to

computer)

(came with modem)

24