Blaupunkt MP56 7 646 583 310 Creating/changing a user-defined equalizer setting Adjust, Auto

Changing basic settings in the settings menu

Creating/changing a user-defined equalizer setting (ADJUST)

You can adjust the three different user-defined equalizer settings to different situations, e.g. for the driver alone, for driver and passenger or for passengers in the front and the rear.

➔Select the user-defined equalizer setting which you want to create/ change as described in the preceding section.

➔Press the softkey < (next to "ADJUST"). The "USER EQ ADJUST" menu opens.

ENGLISH DEUTSCH

PLACE MICRO 5

BREAK

	ADJUST
	USER EQ-1 ADJUST
AUTO	MANUAL
	DEQMAXEX

80 Hz +11db Q1

LOW1HIGH2

LOW2 HIGH3

HIGH1HIGH4

ITALIANO FRANÇAIS

AUTO:

You can automatically create one of the three equalizer settings us- ing a measurement microphone (available as an accessory).

Before starting, ensure the fol- lowing:

•The measurement microphone must be connected before in- stalling the device as described in the installation instructions of the measurement micro- phone.

•There must be true silence dur- ing the measurement since ex- ternal noise falsify the meas- urement. For this reason, close all windows, doors, and the sliding sunroof.

Switch off the engine, but leave the ignition switched on.

•The temperature inside the ve- hicle must be below 55 °C.

•All the loudspeakers must be connected. The sound radi- ating from the loudspeakers must not be obstructed by any objects.

➔Position the measurement mi- crophone

•for the driver only – 10 cm next to the right ear of the driver,

•for driver and passenger – exactly between both at the head level,

NEDERLANDS

107