Changing basic settings in the settings menu
Selecting a sound presetting (PRESET)
This menu item allows you to se- lect one of the following sound presets: VOCAL, DISCO, ROCK, JAZZ or CLASSIC.
➔Press the softkey located next to the desired sound preset.
The selected sound preset is highlighted and shown on the main line A.
➔To turn the equalizer off, press the softkey : (next to
Setting the speed-dependent volume increase (AUTO SND)
When you are driving faster, the device can automatically increase the volume to compensate for the driving noise. In order for this to work, the speedometer signal must be connected as described in the installation instructions. You can adjust this volume in- crease from 0 (no increase) to 5 (maximum increase).
➔Repeatedly press the softkey 9 (next to "AUTO SND").
The current
Note:
If no increase is set, the main line A shows "AUTO SND OFF".
➔On the rocker switch 3, press 
or 
to raise the volume in- crease.
➔On the rocker switch 3, press 
or 
to lower the volume in- crease.
Setting the bass increase (XBASS)
XBASS is a bass increase at low volume. This bass increase can be set in increments from 0 (no in- crease) to 6 (maximum increase) for the following frequencies:
32 Hz, 40 Hz, 50 Hz, 63 Hz, or 80 Hz.
➔Press the softkey ; (next to "XBASS").
The "XBASS" menu item is flashing. The frequency (Hz) and bass increase (GAIN) are shown on the main line A.
➔On the rocker switch 3, press 
or 
to select the desired fre- quency.
➔On the rocker switch 3, press 
or 
to set the desired bass increase.
Configuring the preamplifier out- put for the subwoofer (SUBOUT)
If you want to use an additional subwoofer, it can be adjusted to the other loudspeakers.
110
