Changing basic settings in the settings menu
Inverting the display (INVERT)
➔Press the softkey : (next to "INVERT").
Bright portions of the display are displayed as dark, dark por- tions as bright.
Switching the spectrum analyser on/off (SPECTRUM)
Instead of displaying the audio source, the device can display a 5- band spectrum analyser. For this purpose, the screen saver must be deactivated (see next section) and you must activate the display of the spectrum analyser as follows.
➔Press the softkey ; (next to "SPECTRUM").
•"SPECTRUM ON": The spec- trum analyser can be dis- played.
•"SPECTRUM OFF": The spec- trum analyser cannot be dis- played.
The spectrum analyser automat- ically appears 16 seconds after the last button is pushed instead of the display of the audio source. You can also display the spectrum analyser manually:
➔To do so, press the ESC button @ while the display of the au- dio source is shown.
➔Press any button to switch the spectrum analyser off.
Activating/deactivating the screen saver (SCREEN S)
Instead of displaying the audio source, the device can display a screen saver. For this purpose, the display of the spectrum an- alyser must be deactivated (see previous section) and you must activate the display of the screen saver as follows.
➔Press the NEXT button 6 to change to the second page of the "DISPLAY" menu.
➔Press the softkey 7 (next to "SCREEN S").
•"SCREEN SAVER ON": The screen saver starts immedi- ately.
•"SCREEN SAVER OFF": The screen saver is not shown.
The screen saver automatically appears 16 seconds after the last button is pushed instead of the display of the audio source. You cannot display the screen saver manually:
➔Press any button to interrupt the screen saver and show the display of the active audio source again.
114
