Operating the tuner
"PROG TYP" menu, the tuner automatically searches the next station broadcasting this program type in the se- lected direction. For this purpose, the station must be broadcasting the corre- sponding PTY identification as RDS service.
•If you activated the automat- ic change to alternative fre- quencies in the "RDS" menu, the tuner searches for the same station on a different frequency.
•If you selected the "PTY OFF" option in the "PROG TYP" menu and deactivated the automatic change to alterna- tive frequencies in the "RDS" menu, you can manually ad- just the tuner in increments of 100 kHz.
As soon as a station has been located, it is played. The station name appears on the main line A after a few seconds if the station provides this RDS information.
You can now store this station (see page 87) or restart the man- ual station seek tuning.
Automatically searching for stations
➔While the tuner display ap-
pears, press on 
or 
on the rocker switch 3.
The tuner searches for the next station in the current wave- band in the selected direction. The settings in the menus "SENS" (see page 90) and "PROG TYP" (see page 92) are incorporated.
As soon as a station is located, the seek tuning stops and the lo- cated station is played. The sta- tion name appears on the main line A after a few seconds if the station provides this RDS infor- mation.
You can now store this station (see p. 87) or restart the auto- matic station seek tuning.
Note:
If you press and hold 
or 
on the rocker switch 3, the auto- matically seek tuning skips the stations found until you release the rocker switch again.
86
