Operating the tuner
➔The "SENSITIVITY" menu ap- pears.
➔Press the softkey 7 (next to "FM") to set the seek tuning sensitivity for FM stations or press the softkey < (next to "AM") to set the seek tuning sensitivity for AM stations.
Each seek tuning sensitivity can be adjusted in six incre- ments.
•"1": Low seek tuning sensitiv- ity. During a station seek tun- ing (see page 85), only local strong stations are found.
•"6": High seek tuning sensi- tivity. Poor, remote stations are also found.
Allowing/preventing automatic changing to other regional pro- grammes (REGIONAL)
Some stations divide their pro- grammes into regional program- mes with different contents at certain times. You can use the Regional function to prevent or allow the device from switching to alternative frequencies that are transmitting a different pro- gramme content.
➔Change to the second page of the "TUNER" menu by pressing the NEXT button 6.
➔Press the softkey 8 in the "TUNER" menu (next to "RE- GIONAL).
•"REGIONAL ON": The Re- gional function is switched on. The tuner does not even switch to other regional pro- grammes if the reception quality becomes poor.
•"REGIONAL OFF": The Re- gional function is switched off. The tuner switches to other regional programmes if the reception of the current programme is too poor.
Activating/deactivating im- proved reception (HIGH CUT)
The High Cut function results in an improved reception in case of weak radio reception (FM only).
➔Change to the second page of the "TUNER" menu by pressing the NEXT button 6.
➔In the "TUNER" menu, repeat- edly press the softkey 7 (next to "HIGH CUT").
•"1": The High Cut function is switched on and has a low response sensitivity. If the re- ception is very poor, the in- terference level is automati- cally decreased.
•"2": The High Cut function is switched on and has a high response sensitivity. If the re- ception is poor, the interfer-
NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH
91
