Bosch Appliances Divar -Digital Versatile Recorder Viewing pictures, Monitor a, Monitor B

Divar Installation Manual Operating instructions

EN 3-6

Viewing pictures

The unit has two monitor outputs, A and B. The way in which these monitors display pictures depends on how the system has been set up.

Monitor A

Monitor A is the main monitor. It shows full-screen, quad or multiscreen live or playback camera pictures. Status messages, alarms, motion, and video loss warnings are also displayed on this monitor. When the menu system is activated

Viewing

The drawing shows all possible views for monitor A. Some multiscreen views may have been disabled during set-up. The Divar model and the number of connected cameras can also influence the multiscreen views available.

it is displayed on this monitor.

Monitor B

Monitor B displays a single full-screen picture of a selected camera or a sequence of full-screen pictures. When an alarm or motion input is detected, the camera picture with the Alarm/Motion indicator can be displayed on monitor B. When multiple alarms or motion occur, camera pictures are sequenced on monitor B.

Selecting a monitor to control

To control the display on monitor A:

1

1 2

3 4

4x4

1	2		3	4
5	6		7	8
9	10		11	12
13	14		15	16
		3x3
1		2		3
4		5		6
7		8		9

12+1

1		2	3	4
5		6	7	8
	9		10	11
			12	13

		8+2
1	2	3	4
5	6	7	8

9 10

	4+3
1	2
	3
4	5
6	7

5+1

2

1

3

4 5 6

1.Check that the light on the front panel is lit.

2.If is not lit, press the ALT key and then press the monitor A key .

To control the display on monitor B:

1.Check that the light on the front panel is lit.

2.If is not lit, press the ALT key and then press the monitor B key .

The quad mode can have 4 different quad screens that can be shown in sequence to display 16 camera pictures.

Bosch Security Systems