Bosch Security Systems
Divar | Installation Manual | Menu system EN | 5-6
>>AUTHENTICI TY CHECK• This check verifies that video images and associated data have not been
modified.
• Select the period within which the authenticity check runs. The default
values are the same as the earliest and latest available recording times.
• Press the escape key to cancel the check.
• During the check all other front panel keys are disabled.
• If the result is Not OK, the date and time of the tampered video is
displayed.
>>STOP RECOR DING• Set the period for which you wish to temporarily stop recording.
• The maximum period is one hour.
• The duration counts down to zero.
• Alarms are not recorded when recording is interrupted.
• Interruption of recordings is always logged in the history li st.
• Recording starts automatically when interrupt period has elapsed.
>>STORAGE SE TUP•Storage Setup gives an overview of internal and external storage.
• The total disk space available is shown in Gigabytes.
• Any new disks found are disabled by default.
• Select the storage location you wish to enable or disable. All recorded
video is lost if you change a disk configuration. If you choose Yes to
continue, all video is erased.
•Select Storage Status for an overview of the status of all internal and
external disks.
>>> Storage status
•OK if everything is all right.
•Fail if for some reason the disk is not working properly.
•Fail - reconfigure storage if the disk is not part of the disk set or is
empty.
•SCSI mismatch: change ID to X where X is the expected SCSI ID
and the SCSI ID needs to be changed.
•Not found if the disk is not connected
•Unused if a valid disk is found which is not used (disabled).
>>DELETE VIDE O• Delete recorded video by filling in an end date and time, and selecting
delete video.
• All non-protected recordings made before the specified date and time are
deleted. You must confirm the deletion.
• Protected recordings are not deleted.
>>ERASE DISK• Deletes all recorded video on the disk.
• You must confirm the deletion.