52 | en Basic configuration tasks | Bosch Video | |
Management System | |||
|
| ||
|
|
|
5.Select an iSCSI device and select the desired VRM, and click Assign to assign the iSCSI device to the VRM. Click Next >>.
6.Select the required encoders, select the desired VRM and click Assign to assign them to the VRM.
The video data of these encoders will be stored on the assigned iSCSI device.
Click Next >>.
7.Type all user names and passwords of the listed device in the appropriate cells.
Click Test all to authenticate all devices.
Click Test selected to authenticate only the selected devices. This is useful when you repeat the device scan and you want only the new ones to be authenticated.
8.Click Save >>.
Click Finish when you did not select further devices to be scanned.
To scan local storage or live only encoders:
1.Select the desired encoders and click Assign.
The video data of these encoders will be stored on their local storage devices or their video data will not be stored (live only).
2.Type all user names and passwords of the listed device in the appropriate cells.
Click Test all to authenticate all devices.
Click Test selected to authenticate only the selected devices. This is useful when you repeat the device scan and you want only the new ones to be authenticated.
3.Click Save >>.
Click Finish when you did not select further devices to be scanned.
2012.07 V1 F.01U.269.054 | Quick Start Manual | Bosch Sicherheitssysteme GmbH |
