Bosch Appliances MBV-BPRO-40 To start a camera sequence, To pause a camera sequence

Bosch Video	Basic operation tasks en	65
Management System

–Video loss

–Connection to the camera lost

–No permission to display the camera

–Camera not configured

In addition, for sequences displayed on an analog monitor via a decoder, DiBos cameras cannot be displayed.

Notice!

When the configuration is changed and activated, a camera se- quence (pre-configured or automatic) usually is continued after restart of the Operator Client.

But in the following cases the sequence is not continued:

i A monitor where the sequence is configured to be displayed has been removed.

The mode of a monitor (single/quad view) where the sequence is configured to be displayed has been changed.

The logical number of a monitor where the sequence is config- ured to be displayed is changed.

To start a camera sequence:

1.Select an Image pane where you want the sequence to be played.

2.Right-click a folder in the Logical Tree or Favorites Tree window and click Show as sequence in selected Image pane.

The cameras of the selected folder are displayed one after

the other in the selected Image pane. indicates that the

sequence is running.

To pause a camera sequence:

4
In the Image window toolbar, click	.

The sequence stops playing, as indicated by .

Bosch Sicherheitssysteme GmbH Quick Start Manual 2012.07 V1 F.01U.269.054