Bosch Video | Basic configuration tasks en | 57 | |
Management System | |||
|
| ||
|
|
|
When you add an item to a map folder in the Logical Tree, it is also displayed on the upper left corner of the map. When you add an item to a map, it is also added under the corresponding map node in the Logical Tree of the Operator Client.
To configure the Logical Tree you perform some of or all the following steps several times.
To configure the Logical Tree:
1.
Click | to add folders according to your needs. |
2.Drag devices from the Device Tree to the appropriate
folders.
You can select multiple devices by pressing the CTRL- or the
3. |
|
Click | to add resource files to your structure. |
4.
Select a folder and click to add maps under the selected folder.
5.
6.
Select a folder and click to add a Client Command Script under the selected folder.
7.
Select a folder and click to add a document under the selected folder.
8.
Select a folder and click to add a camera sequence under the selected folder.
9.Drag devices from the Logical Tree or the Device Tree to a map to locate them.
You can add an item only once in a map but you can add it to several locations in the Logical Tree and to several maps.
Bosch Sicherheitssysteme GmbH | Quick Start Manual | 2012.07 V1 F.01U.269.054 |
