54 | en Basic configuration tasks | Bosch Video | |
Management System | |||
|
| ||
|
|
|
4.Click Add iSCSI device.
The Add iSCSI Device dialog box is displayed.
5.Type a desired display name, the IP address of an iSCSI device, and the device type and click OK.
The device is added to the scan wizard dialog box.
6.Assign the iSCSI device to the VRM.
If required assign multiple iSCSI devices.
7.Click Next >>.
The next step of the wizard is displayed.
8.Assign the desired IP devices to the VRM.
9.Click Next >>.
The next step of the wizard is displayed.
10.Type the user names and passwords of the devices in the table.
11.Click Test all to log on to all devices.
If required, select the desired devices and click Test selected to log on to these devices.
In the Status column, the successful logons are indicated
with 
.
The failed logons are indicated with 
.
12.Click Finish.
The iSCSI device is connected to the VRM. Video streams from an IP device assigned to this VRM are recorded on the assigned iSCSI device.
If required, a dialog box is displayed for changing the device names of the detected IP devices to be used for display. Bosch Video Management System names the devices with default names. If desired, you can use the existing names of the devices.
2012.07 V1 F.01U.269.054 | Quick Start Manual | Bosch Sicherheitssysteme GmbH |
