Bosch Video | Basic configuration tasks en | 53 | |
Management System | |||
|
| ||
|
|
|
To scan VIDOS NVRs:
1.Select the desired VIDOS NVRs. Click Next >>.
2.Type all user names and passwords of the listed device in the appropriate cells.
Click Test all to authenticate all devices.
Click Test selected to authenticate only the selected devices. This is useful when you repeat the device scan and you want only the new ones to be authenticated.
3.Click Finish.
4.2Adding a VRM device with iSCSI storage
Main window > 
Devices > 
In your network, you need a VRM service running on a computer, and an iSCSI device.
Caution!
When you add an iSCSI device with no targets and LUNs config- ured, start a default configuration and add the IQN of each en- coder to this iSCSI device.
When you add an iSCSI device with targets and LUNs
To add a VRM device and an iSCSI device:
1.
Right-click and click Scan VRM Devices.
The Bosch VMS Scan Wizard is displayed.
2.Click to check the IP address of the desired VRM computer. You can select multiple computers.
3.Click Next >>.
The next step of the wizard is displayed.
Bosch Sicherheitssysteme GmbH | Quick Start Manual | 2012.07 V1 F.01U.269.054 |
