Bosch Video | Basic configuration tasks en | 59 | |
Management System | |||
|
| ||
|
|
|
4.5Configuring stream quality settings
Main window > 
Cameras and Recording > 
> Stream Quality Settings dialog box
Notice!
For XFM4 encoders configure the maximum bit rate with the
i value of the target bit rate plus 10%. The maximum bit rate is used when a scene is busy and contains motion.
Notice!
Bosch Video Management System uses the two streams in dual streaming encoders as follows:
VRM recording and local storage: Stream 2 is used for Live, stream 1 is used for all recording modes.
ARM based firmware: Stream 2 can also be used for recording. The compression achieved is dependent on the stream quality
i settings, the image complexity, and the level of motion in the scene. With these interdependencies, it is possible to over- specify encoder performance. For example, with a highly com- plex scene with high motion, the encoder may not be able to deliver 4 CIF full frame rate on both streams simultaneously. Refer to your encoder guidelines to help estimate the best set- tings for your conditions.
To add a stream quality settings entry:
1. |
|
Click | to add a new entry in the list. |
2.Type in a name.
Bosch Sicherheitssysteme GmbH | Quick Start Manual | 2012.07 V1 F.01U.269.054 |
