Facia Assembly, Important Service Note

Facia Assembly

The Facia Assembly cannot be removed unless the Outer Door is removed first.

See section 4, Fig. 7-1.

After removing the Outer Door, remove the six T-20 Torx screws securing the Facia Assembly to the Inner Stainless door, Fig. 9-1.

Fig. 9-2

With the screws removed, bring the Facia Assembly down cradling it so as not to scratch the Facia Console.

Fig. 9-1

Fig. 9-3

Now remove the Wiring Connectors by pressing in on the locking tabs of each connector, then sliding the connector up and off from the Control Unit.