Bosch Appliances 6806, TRUE, 6805, 4306, 4302, 6802 manual Facia Assembly, Fig

H

Fig. 9-4

1 2 3

Fig. 9-5

1 2

Fig. 9-6

Fig. 9-7

35

Facia Assembly

With the Facia Assembly removed from the unit, it can be further separated into two assemblies.

To separate, release the four locking tabs and bring the Facia Frame up from the Facia Console, Fig. 9-4.

The Facia Frame houses three components:

Item 1,On/Off Switch.

Item 2,Door Latch Assembly.

Item 3,Control Unit.

Note: The Facia Console or Program Buttons can be replaced at this time.

ON/OFF SWITCH REMOVAL:

Bend the single tab up, item 1.

Then slide the switch up and out from the frame, and remove the Locking Lever, item 2.

Note: The Locking Lever, item 2, switches the unit off when the door is opened during operation.

DOOR LATCH ASSEMBLY REMOVAL:

Bend the two tabs up and slide the Latch down.

CONTROL UNIT REMOVAL:

Press in on the three locking tabs and bring the Control Unit out from the Console Frame.

Note: Always reset the new Control Unit by pressing the appropriate cancellation buttons, see Section 2.